Function Generators: 1023
10 Mhz Function Generator & 100 Mhz Frequency Counter
Function Generator (10 MHz)
Digital Read out for Frequency and Vp
0.001 Hz to 10 MHz, 30 mV to 30 Vpp Function Generator with 1.0% (Typical) Sine Wave Distortion, With External FM & Sweep Facility
OUTPUT WAVEFORMS
Sine , Triangular , Bipolar Square , Unipolar Positive, or, Negative Square , Sawtooth (--triangular wave with variable symmetry), Rectangular (--square with variable symmetry), DC only, and FM or SWEEP of the selected ac waveform.
DC offset can be added to all the above ac waveforms.
FREQUENCY RANGE
0.1Hz to 10 MHz
WAVEFORM CHARACTERISTICS
Sine Wave Distortion: 1% (typical)
Square/Rectangular Wave:
Rise and Fall Time: 20nS (approx.)
Symmetry: 15% to 85%
Triangular Wave: Linearity: + 2 % upto 100 KHz; 5% upto 1 MHz
OUTPUT CHARACTERISTICS
Amplitude Range:
30 mV to 30 V p-p into open circuit (reduced to half into 50 ohms) with a 3-step Coarse Control and 10:1 continuous Fine control.
Output Impedance: 50 ohms +5%
Level Flatness: + 0.5 dB from 1 Hz to 1 M Hz
+ 1.0 dB from 1 M Hz to 10 M Hz
DC Offset:
0 to +15V max,.
Sync Output: TTL level with 50 ohms driver.
DISPLAY OF FREQUENCY/AMPLITUDE
Display: 4-digit LED display.
READOUT ACCURACY:
Max Input Amplitude Limit: +5V
SPECIFICATIONS OF FREQUENCY COUNTER
The Frequency Counter section facilitates the measurement of frequency:
(i) generated by the Function Generator ,
(ii) from any external source, and
(iii) of the mains supply.
100 MHz Counter (100 MHz)
INTERNAL MODE
The Counter in its Internal mode measures the frequency generated by the Function Generator .
Measurement Unit:
As depicted by the RANGE switch of the Function Generator, with decimal point automatically placed.
EXTERNAL MODE
Frequency Range: 10 Hz to 100 MHz.
Sensitivity : 100 mV rms.
Input Impedance: 1 M W
Accuracy: + 0.5 % of reading + 1 Count
Maximum Input : 250V (DC + AC) , Max. AC limited to 15 Vp.
